摘要：Acrel無線溫度設備設備通過ATC600-C收發器和ATE200溫度傳感器、AHE無線溫濕度傳感器直接傳輸溫度和濕度值，并連接到客戶的PLC進行通信控制。

Abstract: Acrel wireless temperature e device directly transmits temperature and humidity values through ATC600-C transceiver and ATE200 temperature sensor, AHE wireless temperature and humidity sensor, and connects to the customer's PLC for communication control.

1.工程概況

1. Project Overview

一位土耳其客戶有一個項目，需要將有線溫度測量PT100更改為無線，并通過我們的接收器的485通信端口連接到PLC以進行自動溫度控制。

A Turkish customer has a project that needs to change the wired temperature measurement PT100 to wireless, and connect to the PLC through our receiver's 485 communication port for automatic temperature control.

2.產品介紹

2.product presentation

Acrel無線溫度系統適用于3-35kV室內開關設備，包括內置開關設備、手車開關設備、固定開關設備和環網開關設備。它也適用于0.4kV低壓開關設備，如固定式開關設備和抽屜式開關設備。無線溫度傳感器可以安裝在開關柜的任何加熱點，該設備利用無線數據傳輸技術實時傳輸監測的溫度數據，并在ARTM Pn上本地顯示這些數據。此外，它還可以通過RS485端口聯網，用于遠程智能監控。

Acrel wireless temperature system is suitable for 3-35kV indoor switchgears, including built-in switchgears, handcart switchgears, fixed switchgears and loop-net switchgears. It is also suitable for 0.4kV low-voltage switchgears such as fixed switchgears and drawer switchgears. The wireless temperature sensors can be installed at any heating point in switchgears, the device utilizes the wireless data transmission technology for real-time transmission of monitored temperature data and displays such data on ARTM-Pn locally. In addition, it can be networked via the RS485 port for remote intelligent monitoring.

AHE100無線溫濕度傳感器主要用于檢測中高壓開關柜、接線盒、環網柜、箱式變壓器等設備內部的溫度和濕度以及配電室的環境。模塊采用特殊外殼，通風效果好，外觀精美，能有效保護內部組件，提高使用壽命。

The AHE100 wireless temperature and humidity sensor is mainly used for the detection of temperature and humidity inside the e such as medium and high voltage switch cabinets, terminal boxes, ring main cabinets, box transformers and the environment of the power distribution room. The module adopts a special shell, which has good ventilation effect and ex appearance, which can effectively protect the internal components and increase the service life.

2.1.網絡拓?fù)?/p>

2.1. Network Topology

圖1

圖2

觸摸屏匹配：ATP007+ATC600-C+AHE100

Touch screen matching: ATC600-C：

注：觸摸屏通過RS485接口與ATC600-C相連，實現溫度和濕度的集中顯示，一個ATC600-C可以接收240個溫度和濕度傳感器。

Note: The touch screen is connected to an ATC600-C through the RS485 interface to realize the centralized display of temperature and humidity, and one ATC600-C can receive 240 temperature and humidity sensors.

2.2相關產品

2.2 related products

3.安裝圖片

3.Installation Picture